Opsite Flexifix Dressing Waterproof 10cm X 1m - 1 roll^{^} (always read the label)

To retain a primary wound dressing: Step 1: Wash hands before and after handling the dressing. Step 2: Apply the primary wound dressing on the skin according to the instructions for use. Make sure the surrounding skin is clean and dry. Step 3: Cut the OPSITE FLEXIFIX roll to the desired length. Step 4: Stretch the OPSITE FLEXIFIX film away from the cut in the backing paper (printed ‘Remove First 1’) to make the backing paper easier to remove. Step 5: Remove the smallest part of the backing paper printed 1. Folding the dressing lengthways can simplify this operation. Step 6: Apply the exposed adhesive then remove the second part of the backing paper and smooth down the edges. Step 7: Remove the green carrier grid marked '3' by lifting and pulling away using the pre-lifted edge along the centre of the green carrier. Repeat to remove the other side. Smooth down the edges of the film again. Step 8: For larger wound dressings repeat the application until the whole dressing is secured. As a skin protection dressing: Step 1: Wash hands before and after handling the dressing. Step 2: Cut the OPSITE FLEXIFIX film to the desired length. Step 3: Stretch the OPSITE FLEXIFIX film away from the cut in the backing paper (printed ‘Remove First 1’) to make the backing paper easier to remove. Step 4: Remove the smallest part of the backing paper printed 1. Folding the dressing lengthways can simplify this operation. Step 5: Apply the exposed adhesive then remove the second part of the backing paper and smooth down the edges. Step 6: Remove the green carrier grid marked '3' by lifting and pulling away using the pre-lifted edge along the centre of the green carrier. Repeat to remove the other side. Smooth down the edges of the film again.

Not available.